LP-102 Ladder

The LP-102 is the perfect solution when you are faced with a smaller fire station that not only has small door openings, but also limited in the length of vehicle that can be kept. The LP-102 can be built as low as 10’ 10” with a pre-piped waterway and 10’ 4” without waterway. If needed, the truck can be designed with an overall length under 40’.

The LP-102 rear mount aerial includes these valuable features:

4-section heavy duty aerial with -8° to +72° operational envelope
Compact 11’ 6” standard travel height
Low travel height available, 10’ 10” with waterway or 10’ 4” without pre-piped waterway
102’ vertical reach at 72° and 97’ horizontal reach at 0°
500 pound tip load flowing 1250 GPM
Standard equipment includes rung illumination and electric actuated positional waterway

Specifications

Chassis:	Inferno up to 605 hp
Body:	Extruded Aluminum – quint or truck (no pump/tank)
Compartments:	Quint 1: Left side full height x 24” deep; Right side full height w/EZ-Stack hose bed Quint 2: Left and right side full height 24” deep lower/12” deep upper w/hose chutes Truck: Left and right side full height, 24” deep lower/transverse upper ahead of aerial
Ladder Storage:	Up to 200’ ground ladders enclosed in full length torque box
Pump:	Up to 3000 gpm pump
Tank Size:	Up to 500 gallons
Ladder and Reach:	4-section heavy duty rear mount aerial with - 8° to +72° operational envelope Over 180° rotation at - 8° 102’ vertical reach at 72° and 97’ horizontal reach at 0° Able to overcome setbacks with impressive 57’ vertical and 84’ horizontal reach at 30°
Rated Load Capacity:	500 pounds flowing 1250 GPM Up to 1750 pounds distributed + 500 pounds at the tip while flowing 1250 GPM No restrictions on aerial or monitor movement or placement while flowing 1250 GPM
Warranty:	10 year cab and body structural 25 year aerial structural 10 year waterway and waterway seals 15 year torque box & stabilizer 2 year mechanical, chassis, cab, body and aerial

Features & Options

Well-lit ladder rungs for safe and easy night operations

Max out your compartment space with our HD-77 MVP Rescue Ladder. Over 205 cubic feet of usable storage space plus over 150’ of ground ladders in the rear torque box opening. The right side EZ-Stack hose bed can carry 1000’ x 5” and 400’ x 2-1/2”.

Save set up time and stop guessing where the auxiliary ground pads should be placed. We offer an optional recessed magnet in the auxiliary pad, allowing you to connect to the stabilizer foot pad prior to deployment.

Standard on all Ferrara aerial ladders is an 11 degree angled, bolt-on egress section. The downward angle allows for easy transition to a window or roof. And because it’s bolt-on, is easily replaced if ever damaged.

Extension/retraction is smooth and rapid with our dual Siamese extension cylinders. Why settle for 2 extension cylinders when you can have 4?

Quickly put out a fire in an attic or upper void area with our optional 165 vertical travel monitor. This allows you to flow a master stream at the ladder’s rated capacity up to 30 degrees above horizontal.

Stabilizer foot pads are angled slightly down toward the middle of the truck. During the winter, when you park the truck in your station, snow, ice and slush will melt and drain off the foot pad instead of melting there and causing the pad to rust.

Supply a standpipe without disconnecting the nozzle on the aerial monitor with our optional 2-1/2” discharge at the ladder tip.

All sheaves are fully enclosed, so you don’t have to worry about getting PPE or other gear caught between the cable and pulley.

Use our optional 500 pound capacity Rope Rescue Pulley system to safely and easily perform high angle rescue operations.

Standard equipment on all Ferrara aerials is a pair of load lifting eyes at the ladder tip. Rated at 500 pounds as a pair, they give you added rescue capability.

Ferrara’s HD-77 with right side EZ-Stack hose bed can easily carry 1000’ x 5” and 400’ x 2-1/2” and you still have a full height compartment ahead of the right wheel.

The turntable control console has a clean design with easy to find and read instruments. The ladder controls are direct hydraulic, requiring no manual overrides.